https://yamahaforktubes.com Wed, 13 May 2026 06:21:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://yamahaforktubes.com/2025/02/yamaha-ty250-1974-1981-twinshock-fork-tubes-34mm-o-545mm/ https://yamahaforktubes.com/2025/02/yamaha-ty250-1974-1981-twinshock-fork-tubes-34mm-o-545mm/#comments Sat, 22 Feb 2025 09:49:15 +0000 https://yamahaforktubes.com/2025/02/yamaha-ty250-1974-1981-twinshock-fork-tubes-34mm-o-545mm/







New pair of YAMAHA TY250 Fork Tubes, For Twinshock Models, 34mm diameter and 545mm length. Please Check the length and diameter of your existing fork tubes to make sure they are standard size. Price is for two stanchions (one pair). These fork tubes are OEM reproductions of the original parts and are therefore designed to fit the models listed. Forks can be retro fitted to many other brands and models and fork manufacturers but please make contact before you order so we can 1. Advise if they can be adapted 2. Advise on geometry and correct fitment. FANTIC 125cc (TX250) 200cc (TX350) 1979-82 – Fork Tubes – 35mm &#######xD8; – 580mm Long. FANTIC 240cc (FM450) – 1981-89 – Fork Tubes – 35mm &#######xD8; – 580mm Long. FANTIC SERIES 125, 205, 245, 305 (Monoshock) – Fork Tubes – 35mm &#######xD8; – 580mm. MOTO GORI MT TRIALS- MARZOCCHI FORK TUBES – 35mm &#######xD8; – 580mm Long. PUCH FRIGERIO GS 125-175 F2 – MARZOCCHI FORK TUBES – 35mm &#######xD8; – 721mm Long. GILERA GXR 125 ENDURO – MARZOCCHI – FORK TUBES – 35mm &#######xD8; – 721mm Long. YAMAHA TY80 – All Years – Fork Tubes – 25mm &#######xD8; – 460mm Long. OSSA DESERT PHANTOM 1974-77 – 35mm &#######xD8; – Choice 535, 585, 660mm Long. FOR YOUR FORKS SAKE. THE NO1 SUPPLIER OF CLASSIC TRIALS, MOTOCROSS AND ENDURO FORK TUBES IN THE UK AND EUROPE. Listing and template services provided by inkFrog.

]]> https://yamahaforktubes.com/2025/02/yamaha-ty250-1974-1981-twinshock-fork-tubes-34mm-o-545mm/feed/ 0 https://yamahaforktubes.com/2024/04/yamaha-dt250-dt-250-1971-front-suspension-forks-34mm/ https://yamahaforktubes.com/2024/04/yamaha-dt250-dt-250-1971-front-suspension-forks-34mm/#comments Fri, 05 Apr 2024 23:21:48 +0000 https://yamahaforktubes.com/2024/04/yamaha-dt250-dt-250-1971-front-suspension-forks-34mm/









Yamaha DT250 DT 250 1971 Front Suspension Forks. Seals cannot be guaranteed. Comes as shown in images below. See details in images below. If you are looking for a part that we don’t have listed please ask send us a message and we will do our best to get the part listed for you! If you need any help please don’t hesitate to send us a message, we aim to reply within 24 hours. Offshore destinations listed below. If you are in any of these locations or postcodes please wait for a revised invoice to be sent. We are unable to deliver to P. We are unable to adjust prices once an order is paid for. Any small to medium sized item paid for with. Before 1pm we aim to dispatch the same day. We accept all major credit and debit cards. Personal cheques and postal orders are all accepted. Please note cheques will need to clear prior to dispatch of the item.

]]> https://yamahaforktubes.com/2024/04/yamaha-dt250-dt-250-1971-front-suspension-forks-34mm/feed/ 0 https://yamahaforktubes.com/2021/11/yamaha-rd250-rd400-cd-fork-tubes-a-new-pair-of-34mm-stanchions-197678/ https://yamahaforktubes.com/2021/11/yamaha-rd250-rd400-cd-fork-tubes-a-new-pair-of-34mm-stanchions-197678/#comments Wed, 03 Nov 2021 19:46:30 +0000 http://yamahaforktubes.com/2021/11/yamaha-rd250-rd400-cd-fork-tubes-a-new-pair-of-34mm-stanchions-197678/



A new pair of Yamaha RD250400 34mm fork tubes, as good or even better than the originals, due to modern manufacturing methods. CNC machined from precision, seamless high specification carbon steel, sourced in Japan. Hard chromed, and precision ground to final high specifications. Manufactured in Taiwan by a company with over 30 years experience, indistinguishable from genuine Yamaha. We have used these tubes on our own restorations for over 5 years, perfect! Yamaha RD250/400 C and D models 1976 – 1978 (please make sure yours are 34mm and NOT 35mm). Fork Caps also now available see one of my other listings. In stock at my Warrington warehouse, available for immediate despatch. The item “Yamaha RD250 RD400 C/D fork tubes A new pair of 34mm stanchions 1976/78″ is in sale since Tuesday, November 2, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Suspension & Handling\Fork Tubes & Stanchions”. The seller is “pits1990″ and is located in warrington. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Czech republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Liechtenstein.

• Manufacturer Part Number: pitstop motorcycles ltd
• Colour: Chrome
• Country/Region of Manufacture: Taiwan
• Machine Type: Street Motorcycle
• Reference OE/OEM Number: 1A0-1AO
• Unit Quantity: pair
• Brand: Yamaha
• Intended Use: Replacement Part
• Classic Motorcycle Part: Yes

]]> https://yamahaforktubes.com/2021/11/yamaha-rd250-rd400-cd-fork-tubes-a-new-pair-of-34mm-stanchions-197678/feed/ 0 https://yamahaforktubes.com/2020/08/new-dachi-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/ https://yamahaforktubes.com/2020/08/new-dachi-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/#comments Mon, 03 Aug 2020 19:39:56 +0000 http://yamahaforktubes.com/2020/08/new-dachi-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/


A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. The item “New Dachi Fork Tubes for 1971-1976 Yamaha DT1 RT1 DT2 RT2 DT 250 360 400 34mm” is in sale since Monday, August 3, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “dcplastics” and is located in Sebewaing, Michigan. This item can be shipped worldwide.

]]> https://yamahaforktubes.com/2020/08/new-dachi-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/feed/ 0 https://yamahaforktubes.com/2020/07/niche-cycle-supply-yamaha-rd400-34mm-titanium-nitride-fork-tube-set/ https://yamahaforktubes.com/2020/07/niche-cycle-supply-yamaha-rd400-34mm-titanium-nitride-fork-tube-set/#comments Fri, 10 Jul 2020 14:47:11 +0000 http://yamahaforktubes.com/2020/07/niche-cycle-supply-yamaha-rd400-34mm-titanium-nitride-fork-tube-set/ ]]> https://yamahaforktubes.com/2020/07/niche-cycle-supply-yamaha-rd400-34mm-titanium-nitride-fork-tube-set/feed/ 0 https://yamahaforktubes.com/2020/04/yamaha-rd250-rd350ab-19731975-new-pair-of-fork-tubestanchions-34mm/ https://yamahaforktubes.com/2020/04/yamaha-rd250-rd350ab-19731975-new-pair-of-fork-tubestanchions-34mm/#comments Sun, 19 Apr 2020 10:59:37 +0000 http://yamahaforktubes.com/2020/04/yamaha-rd250-rd350ab-19731975-new-pair-of-fork-tubestanchions-34mm/






A New Pair of replacement fork tubes (you get 2 tubes). To replace the standard 34mm originals. As fitted to the RD250 and RD350 A and B models circa 1973 – 1975. Please check that yours are 34mm diameter, a used fork picture (stripped) is shown to help you Identify. They have been manufactured to exacting standards, to a quality that is as good or better than genuine, from hard chromed high quality steel. Our tubes have a waisted area near the bottom, to aid the internal oil circulation (Like the later updated models) and do not have the small line very close to the top cap. (The height fitting guide line). Just fit your old shuttle valve assembly (second to last pic’ shows the bottom of the tubes with one shuttle fitted as an example) then assemble as you would a genuine set. Full back up sevice /advice provided, “not sure just ask”. The item “Yamaha RD250 RD350AB 1973/1975 New Pair of Fork tube/stanchions. 34mm” is in sale since Saturday, April 18, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Suspension & Handling\Fork Tubes & Stanchions”. The seller is “pits1990″ and is located in warrington. This item can be shipped to United Kingdom, Reunion.

• Classic Motorcycle Part: Yes
• Manufacturer Part Number: Does Not Apply
• Brand: Aftermarket
• Intended Use: Replacement Part
• Part Manufacturer: Aftermarket

]]> https://yamahaforktubes.com/2020/04/yamaha-rd250-rd350ab-19731975-new-pair-of-fork-tubestanchions-34mm/feed/ 0 https://yamahaforktubes.com/2020/03/new-dachi-fork-tubes-for-1977-1978-yamaha-dt-250-400-34mm/ https://yamahaforktubes.com/2020/03/new-dachi-fork-tubes-for-1977-1978-yamaha-dt-250-400-34mm/#comments Sun, 08 Mar 2020 08:31:54 +0000 http://yamahaforktubes.com/2020/03/new-dachi-fork-tubes-for-1977-1978-yamaha-dt-250-400-34mm/


A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 34mm diameter Replaces OEM number 1M1-23124-00-00. The item “New Dachi Fork Tubes for 1977 1978 Yamaha DT 250 400 34mm” is in sale since Wednesday, January 29, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “dcplastics” and is located in Sebewaing, Michigan. This item can be shipped worldwide.

]]> https://yamahaforktubes.com/2020/03/new-dachi-fork-tubes-for-1977-1978-yamaha-dt-250-400-34mm/feed/ 0 https://yamahaforktubes.com/2019/12/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm-2/ https://yamahaforktubes.com/2019/12/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm-2/#comments Thu, 05 Dec 2019 05:27:48 +0000 http://yamahaforktubes.com/2019/12/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm-2/


A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. The item “New Fork Tubes for 1971-1976 Yamaha DT1 RT1 DT2 RT2 DT 250 360 400 34mm” is in sale since Wednesday, December 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “dcplastics” and is located in Sebewaing, Michigan. This item can be shipped worldwide.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: DC351-4444
• Brand: Daichi
• Non-Domestic Product: No

]]> https://yamahaforktubes.com/2019/12/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm-2/feed/ 0 https://yamahaforktubes.com/2019/09/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/ https://yamahaforktubes.com/2019/09/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/#comments Sun, 15 Sep 2019 07:07:59 +0000 http://yamahaforktubes.com/2019/09/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/


A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. The item “New Fork Tubes for 1971-1976 Yamaha DT1 RT1 DT2 RT2 DT 250 360 400 34mm” is in sale since Wednesday, September 11, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “dcplastics” and is located in Sebewaing, Michigan. This item can be shipped worldwide.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: DC351-4444
• Brand: Daichi
• Non-Domestic Product: No

]]> https://yamahaforktubes.com/2019/09/new-fork-tubes-for-1971-1976-yamaha-dt1-rt1-dt2-rt2-dt-250-360-400-34mm/feed/ 0 https://yamahaforktubes.com/2019/08/yamaha-rd400-34mm-premium-gold-fork-tube-set-titanium-nitride-stock-length/ https://yamahaforktubes.com/2019/08/yamaha-rd400-34mm-premium-gold-fork-tube-set-titanium-nitride-stock-length/#comments Mon, 19 Aug 2019 16:44:26 +0000 http://yamahaforktubes.com/2019/08/yamaha-rd400-34mm-premium-gold-fork-tube-set-titanium-nitride-stock-length/




Unbelievable set of Titanium Nitride coated RD400 fork tubes. TiN coating provides a very hard, wear resistant surface. We manufactured the same fork tubes in hard chrome, but wanted to take it another notch for those who want the absolute best available. Modern manufacturing processes have greatly improved these over the originals. CNC milled and drilled. Yamaha RD400 34mm Premium Gold Fork Tube Set Titanium Nitride Stock Length. Yamaha RD400 1976 – 1978. When Purchasing Multiple Items. We provide quick service to all corners of the world. We need our international customers to be aware of a few things. If you need the order to arrive quickly, the cheapest method offered may not be suitable. There can be many reasons. This is to protect our reputation, and our bottom line. We supply all relevant sizing information for each carburetor, so please check to be sure you are ordering what will work for your project. Jetting and Carburetor Parts. You must make sure that you know what series and size(s) of jetting you need. We provide actual photos on most parts, and we are here to help determine what you need if you are unsure. Message us if you beleive you have received a faultly electronic part, and we will help determine the issue. Exhaust Systems, Mufflers, and Head Pipes. We do not accept back exhaust products that have been installed or where installation was attempted. If you feel you have received a product in error, message us before you attempt the installation. We know you want your parts as soon as possible. We stock what we sell. All of the items offered on this site are stocked in our warehouse in beautiful St. Every item has real time availability displayed, eliminating 99.9% of backorders. We pride ourselves in taking our own product photos so you know exactly what you are getting. 12-06-2018 19:51:32. The item “Yamaha RD400 34mm Premium Gold Fork Tube Set Titanium Nitride Stock Length” is in sale since Wednesday, May 1, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Fork Tubes”. The seller is “niche-cycle” and is located in Saint Petersburg, Florida. This item can be shipped worldwide.

• Brand: NCS
• Manufacturer Part Number: NCS4211
• Length: Stock Length
• Diameter: 34mm
• Surface Finish: Titanium Nitride

]]> https://yamahaforktubes.com/2019/08/yamaha-rd400-34mm-premium-gold-fork-tube-set-titanium-nitride-stock-length/feed/ 0